You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

The PanSTARRS images are interpolated onto a regular grid of images that cover the sky.  The grid consists of large 4°x4° projection cells that are centered on lines of constant declination spaced 4 degrees apart.  For convenience of access, each projection cell is divided into a 10x10 grid of skycells, each 0.4°x0.4°.  The skycells for a given projection cell share a seamless world coordinate system with the same tangent projection, so they can be easily pasted together to produce larger images.  The pixel size is 0.25 arcsec, which is by design very close to the native image scale of the detector (0.258'').

Contents

Projection Cells in the RINGS.V3 Tessellation

The PS1 image layout for the 3PI survey is called the RINGS.V3 tessellation.  It was defined by Tamas Budavari to meet the goals of defining a regular image pattern with nearly square cells that covers the sky while minimizing redundant image overlap.  The sizes of the large projection cells are approximately constant over the sky.  

The projection cell centers are located on lines of constant declination spaced 4° apart. At a given declination, the pointing centers are equally spaced in right ascension around the sky, with the number of RA points changing to account for the convergence of RA lines in the spherical sky. The pattern is defined to cover the entire sky from δ = −90° to +90°.  There are 46 declination zones numbered starting at 0 for an image at δ = −90°, 1 for a row of 9 images centered at δ = −86°, 2 at δ = −82°, and so on; the images in zones 22 and 23 are at δ = −2° and +2°, and zones 44 and 45 are at δ = +86° and +90° respectively.

Within a given declination zone, the projection cells are centered at RA(n) = n Δα = n 360°/M where M is the number of RA cells in the zone. Finally, the projection cells themselves are numbered consecutively (ordered by increasing RA) starting at 0 at the south pole, 1–9 at δ = −86°, etc.

Since the PS1 survey covers the sky only for δ > −30°, not all projection cells are used for PS1 images.  The first PS1 projection cell is number 635 at RA=0°, δ = −30°, and the last one is 2643 at δ = +90°.  The table at the bottom gives the details on the number of cells in each row, the exact sizes of the images, etc.

Note that this tessellation applies to the PS1 3PI survey.  For the Medium Deep Surveys (which do not yet have image products), special projection cells are used that are centered on each medium deep field.

The figures below display the projection cells for the entire PS1 sky and for the region around the north celestial pole.

Figure 1: Aitoff plot of all 2,009 PS1 projection cells for the 3PI survey. The coverage extends from declination −30° to the north celestial pole.

 

Figure 2: PS1 projection cells near the north celestial pole, where the image overlap is greatest due to convergence of the RA grid.  The projection cells are 4°x4° in size and are on rings spaced by 4° in declination.

Note that the overlap regions between the projection cell centered on the north celestial pole and the neighboring cells are at some spots extremely small. In fact, the polar cell is currently slightly too small to create adequate overlap with the neighbors (Figure 3), so there is a gap in the PS1 sky coverage around RA=180°, Dec=87.97°.  In that region there are no image pixels and no catalog coverage.  The missing region is small (~1.6x10-3 sq deg).  In the future the data near the pole will be reprocessed to generate a larger image that has the necessary overlap.

Figure 3: Closeup of PS1 projection cells near the north celestial pole showing regions where the overlap is small, or (in the case of the middle plot) has gaps between the images.

Skycells

The projection cell images would be large and inconvenient to download – they are typically about 63000x63000 pixels and so would be about 8 GB each.  To make them easier to work with, each projection cell is divided into a grid of 10x10 skycells.  The skycells are typically 0.4°x0.4° in size. These images are simple rectangular FITS images that share the same tangent world coordinate system with the original projection cell image (i.e., they have the same CRVAL1, CRVAL2, and pixel size).  They can be pasted together to make a larger image. 

Adjacent skycells within a projection cell overlap by 240 pixels (60 arcsec) at each edge with the neighboring skycells.  Consequently, for objects and structures smaller than 2 arcmin it is generally not necessary to combine data from adjacent skycells.

Skycell images have names like skycell.nnnn.0yx where nnnn is the projection cell number (which ranges from 635 to 2643) and 0yx gives the skycell location in the image, with y and x ranging from 0 to 9 indicating the respective y and x section of the projection cell.   The 000 skycell is in the bottom left corner of the projection cell, 010 is just above it, and 099 is in the upper right corner.

Projection Cell Table

The table below gives all the details on the PS1 projection cells.  Zone is the declination row number, which starts at 0 at δ = −90°. ProjCell is the projection cell number for the first cell on that row.  M is the number of cells in the row (so the projection cell number runs from ProjCell to ProjCell+M−1).  Dec is the declination of the image center.  Xsize and Ysize give the size of the full projection cell image in 0.25 arcsec pixels.  Xsub and Ysub give the size of the skycell images into which the projection cell is divided for storage in FITS files.  Note that Xsub = (Xsize-480)/10+480 pixels.  The final two columns, MinDec and MaxDec, give the declination range over which this row is the best choice.  These columns are used to select a declination zone in the region where adjacent zones overlap.  (The actual algorithm used is a bit more complicated near the north pole, where a simple declination threshold is not sufficient to identify the best projection cell.)

This table is also available as a FITS binary table.

Zone

ProjCell

M

Dec

Xsize

Ysize

Xsub

Ysub

MinDec

MaxDec

15

635

79

-30.0

58420

58370

6274

6269

-31.989

-27.991

16

714

82

-26.0

58230

58330

6255

6265

-27.991

-23.992

17

796

84

-22.0

58470

58290

6279

6261

-23.992

-19.993

18

880

86

-18.0

58420

58260

6274

6258

-19.993

-15.994

19

966

88

-14.0

58100

58220

6242

6254

-15.994

-11.996

20

1054

89

-10.0

58160

58180

6248

6250

-11.996

-7.997

21

1143

89

-6.0

58590

58150

6291

6247

-7.997

-3.998

22

1232

90

-2.0

58080

58110

6240

6243

-3.998

0.000

23

1322

90

2.0

58080

58110

6240

6243

0.000

3.998

24

1412

89

6.0

58590

58150

6291

6247

3.998

7.997

25

1501

89

10.0

58160

58180

6248

6250

7.997

11.996

26

1590

88

14.0

58100

58220

6242

6254

11.996

15.994

27

1678

86

18.0

58420

58260

6274

6258

15.994

19.993

28

1764

84

22.0

58470

58290

6279

6261

19.993

23.992

29

1848

82

26.0

58230

58330

6255

6265

23.992

27.991

30

1930

79

30.0

58420

58370

6274

6269

27.991

31.989

31

2009

76

34.0

58330

58420

6265

6274

31.989

35.987

32

2085

72

38.0

58730

58470

6305

6279

35.987

39.986

33

2157

68

42.0

58880

58520

6320

6284

39.986

43.984

34

2225

64

46.0

58750

58570

6307

6289

43.984

47.982

35

2289

60

50.0

58290

58630

6261

6295

47.982

51.980

36

2349

55

54.0

58510

58700

6283

6302

51.980

55.977

37

2404

50

58.0

58460

58790

6278

6311

55.977

59.974

38

2454

45

62.0

58080

58870

6240

6319

59.974

63.970

39

2499

39

66.0

58750

59010

6307

6333

63.970

67.965

40

2538

33

70.0

59330

59180

6365

6350

67.965

71.958

41

2571

27

74.0

59810

59390

6413

6371

71.958

75.950

42

2598

21

78.0

60200

59660

6452

6398

75.950

79.940

43

2619

15

82.0

60490

59970

6481

6429

79.940

83.936

44

2634

9

86.0

60690

59870

6501

6419

83.936

87.969

45

2643

1

90.0

58080

58080

6240

6240

87.969

90.000

PS1 Image Grid Layout
Projection cell size

~ 4° ×
63k × 63k pixels

Pixel size0.25 arcsec
No. of projection cells2,009
Declination spacing
Skycell size

~ 0.4° × 0.4°
6.3k × 6.3k pixels

No. of skycells~ 200,000
Skycell edge overlap240 pixels = 60"
  • No labels